|
|
WITH APPLICATOR
INSTALLATION
This is the Standard method applicable to most tyres. |
|
|
|
| 1) Remove the valve core from the tyre. |
2) Cut a corner of the bag and pour the beads into the Applicator
bottle. |
3) Screw the plastic tube down onto the valve stem. |
|
|
|
4) Attach the tube to
the end of the applicator bottle. |
5) Gently pour the beads into the valve stem. |
6)If you pour too fast and they get stuck, just
tap on the valve stem with your finger or use a vibrating engraver. |
|
|
| 7)Install the valve core. That's all there is to
it! |
|
FOR
TYRES WITH DOUBLE BEADLOCKS
The technical description for these is "2-piece internal
double beadlocks". |
These pictures are 37x12.50-16 tyres that
weigh 75lb on a 16x8 wheel for a total weight of 140 lbs
each. Only 10 oz of Dyna Beads was used per tyre.
Pictures courtesy of http://www.pavementsucks.com
|
|
|
|
|
| 1) This shows the sophisticated device used to spread the
rim pieces. |
2) Now we simply pour in the Dyna Beads! |
3) The result was a vibration-free ride, tested to 75 mph. |
|
|
|
